Gas range ovens are an essential in many households, providing solid cooking capabilities and serving up delicious meals for years. However, like any other appliance, they may experience problems over time. One of the most common issues that can arise is a malfunctioning Miele oven control board. This is the part which controls the oven’s temperature and timer. It can cause your oven to become inoperable or even difficult to use. With a few basic equipment and knowledge it’s easy to replace the Miele control boards at home. We’ll guide you through the steps to replace the Miele gas oven control board so that you can swiftly return to the food you love.
Instructions
1. Unplug the Miele range and switch off the gas supply. Lay a sheet of cardboard to the left of the range to avoid scratching the floor. Remove the range out of the cabinet, unplug its power cord, and turn off the gas supply. Use a helper if necessary.
2. Remove the Miele control panel back shield.
3. To remove the Miele oven controller board you must take a digital image of every wire that is connected to it. This will allow you to identify the appropriate wires, and then connect them to the new control board. The wires must be separated from the control board for the oven. Remove the screws for mounting and then remove the oven control board from the control panel.
4. Attach the overlay to your new Miele oven controller board. If the overlay on your existing oven controller board is in excellent order and you want to use it for the new control board, gently remove the overlay with the help of a knife. The overlay can be attached to your new Miele oven control board, leaving enough adhesive residual.
5. Transfer the overlay from an existing Miele controlboard: Attach the new overlay to your control board if you purchased an overlay that is new.
6. Install the new Miele oven control board: Position the oven’s electronic control board and then reinstall the mounting screws. Connect all wires to the Miele oven controller board by using the digital image as a guide.
7. Attach the Miele control panel back shield The control panel should be placed back shield on the back of the control console. Secure the back shield with the screws for mounting.
8. Switch on the gas supply and connect the power cord to bring back power.
Install the Miele range into the cabinet. Make sure the front leveling foot is aligned with the anti-tip bracket to make sure that the range won’t slide ahead when the door of the oven opens. Then, pull out the oven rack with the load. Use a helper if necessary.
While it might seem difficult to replace a Miele oven control board, using the correct tools and instructions, this is an easy task which will save you time and cost. This article will show you how to change a Miele oven’s control board. We’ll also go over the steps involved in installing the new control board, and testing it to make sure it’s working correctly. By following these steps you will be able to avoid the expense and hassle hiring a professional and return your oven to running in no time. Always remember to take safety precautions when working with appliances , and refer to the directions of the manufacturer if are unsure. With a bit of patience and some basic skills in DIY you can easily change your gas range oven control board and relish many wonderful meals that are cooked perfectly.