My Westinghouse Refrigerator Is Not Making Ice

A lot of households require a reliable Westinghouse refrigerator that is able to offer plenty of ice. An efficient ice maker is vital for any household, whether you want to prepare drinks, keep food fresh or host guests. It is difficult and frustrating to have Westinghouse refrigerators to stop making the ice. There are a variety of reasons a Westinghouse refrigerator may not be producing the ice you want, from a blocked water line to a faulty ice maker.

In this post we’ll look at the most common causes for this issue and provide you with steps-by-step directions on how to fix the Westinghouse refrigerator not making the ice. The information and guidance will help you diagnose the problem quickly and fix your refrigerator to make ice once more.


Common solutions for: My Westinghouse Refrigerator is not making Ice


Westinghouse Refrigerator Main Controller Board:

This board controls the voltage sent to the ice maker. The icemaker may stop working when the control panel isn’t in good condition. You can inspect the board for signs of damage or a shorted component. After studying the wiring diagram of the Westinghouse refrigerator, you may make use of a multimeter or magnifying glass to check if there is enough voltage to the ice maker. The temperature of the freezer must be Above 10 Degrees F (12C). If the freezer temperature exceeds 10°F (12C), the icemaker will not produce ice cubes effectively. The ice maker should operate at a temperature between 0 and 5°F (-18 to 15C). Make sure that the temperature of the freezer is not too high, and that the condenser fan is operating properly. You should also look for the presence of frost on the coils of the condenser. A part of the defrost process has probably failed if the evaporator coils are covered in frost.


Westinghouse Refrigerator Water Inlet Valve:

The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. The valve for water inlet could be damaged or not enough pressure to allow water flow. In the end, the Westinghouse ice maker won’t create ice. In order to function properly, the valve needs to have at or above 20psi. Make sure that the water pressure to the valve is at minimum 20 psi. You can check the power supply to the water inlet valve with a multimeter if the water pressure is sufficient. Replace the water inlet if the water pressure is sufficient and the power is sufficient.


Westinghouse Refrigerator Ice Maker Assembly

A component could be defective. Since many of the components for ice makers are not sold separately, you may need to purchase and replace the whole Westinghouse Ice Maker Assembly. Before replacing an assembly of ice makers, make sure to inspect the water line, the water inlet as well as the fan and water heater. If you find that none of the components are defective and the temperature of the freezer isn’t less than 15 degrees Fahrenheit, then replace the entire assembly of the ice maker. The water supply in the water supply to your home might have low pressure in the water supply. The valve that supplies water to the inlet pipe provides water to the ice maker maker and water dispenser. For the water inlet to function properly, it should be at minimum 20 psi. Check the water flow and test the pressure to see whether it’s at or above 20 psi.


Confirm that the icemaker is “On”:

Make sure the Westinghouse icemaker is turned on and that the arm or paddle can move freely. If you own an in-door ice-dispensing model ensure that the indicator light is on in the event that the door is open. Westinghouse Refrigerator door switch: The door switch switches off the Ice and water dispenser when the Westinghouse refrigerator’s door is opened. If the door switch fails, the dispenser will not turn on. It is possible to check the continuity of your door switch using a multimeter. Repair the door switch in case it does not have continuity following activation.


Westinghouse Refrigerator Icing Level Control Board:

Some Westinghouse refrigerators use a infrared beam for detecting the level in the ice bucket. The beam of infrared is cut off if the level of ice has reached the level of the bucket. The control board shuts off the machine. The control board tells the icemaker that the ice layer is dropping to below the beam. If the ice level controller board is damaged and the maker of ice will stop making it. Check that the power supply to your Ice Level Control Panel is functioning. If the ice level control board is getting power, however, the ice maker won’t work, replace the ice level control board.

Westinghouse Refrigerator Water Filter

A clogged water filter can restrict the flow of water into the dispenser and prevent the ice maker from functioning effectively. The water quality and the proper flow should be maintained by the water filter, which is changed every six months.


An auger motor for Westinghouse Refrigerators:

This will allow many Westinghouse refrigerators dispense ice properly. It turns an auger blade which moves the ice from the bucket down to the chute. If the auger motor is damaged or fails the ice stops moving forward and falls into the chute. This could create the impression that the ice maker isn’t working. To determine if the auger motor is defective, pull off the bucket of ice, then turn the bucket auger by hand. A multimeter can be used to check the electrical continuity of the motor, if it is able to rotate freely. Replace the auger motor if it doesn’t have continuity or isn’t working.


Westinghouse Refrigerator Ice bucket

Many Westinghouse refrigerators have a separate motor to spin an auger blade and push the ice out of the bucket down the chute. If the auger motor is spinning but the ice is not dispensing, the ice container may be damaged. Check the ice bucket, auger and drive coupler for cracks or excessive wear. Replace the ice bucket if necessary. In conclusion the conclusion is that the issue of a Westinghouse refrigerator that isn’t producing ice is a typical problem that can be caused by a variety of factors. There are a variety of things you can do to make your appliance produce ice again, including the blockage of the water line, faulty ice makers, and thermostat issues.

This article will help you understand how to identify and fix the problem without professional assistance. Regular maintenance like cleaning the ice maker or making sure that there’s no obstruction in the water line will help prevent future problems. This can also make sure that your Westinghouse refrigerator runs smoothly. If you are in need of ice, don’t be hesitant to take action and get your Westinghouse refrigerator functioning once more.