My KitchenAid Refrigerator Is Not Making Ice

A lot of households require an efficient KitchenAid refrigerator that can provide plenty of ice. An ice maker that is functional is a must-have appliance that makes ice for all occasions. It can be difficult and frustrating for KitchenAid refrigerators to stop making the ice. There are several reasons that your KitchenAid refrigerator could not produce ice. This article will explain the reasons behind this and provide step by step instructions for how fix a KitchenAid fridge that isn’t producing Ice. You will be able diagnose the issue and get your refrigerator to producing ice quickly with the guidance.

Common solutions to the problem: My KitchenAid Refrigerator isn’t making Ice

KitchenAid Refrigerator Main Board

The control board of the KitchenAid refrigerator controls the voltage sent to its Ice maker. The icemaker might stop working when it’s not in good shape. Inspect the board for any indications of damage or a defective component. A multimeter is a good tool to determine if voltage is reaching the ice maker. Freezer Temperature Above 10 Degrees F (-12C). The Ice maker will not create ice cubes if temperature of the freezer is greater than 10 degrees Fahrenheit (-12C). The freezer temperature should be set between 0 and 5 degrees Fahrenheit (-18 to -15C) for the maker to function effectively. Check that the freezer temperature is not too high and that the condenser fan is operating correctly. Also, make sure to examine if there’s any frost on the coils of the evaporator. A part of the defrost process is likely to fail if the evaporator coils are covered in frost.

KitchenAid Refrigerator Water Inlet Valve

The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. The valve for water inlet could be damaged or not pressure enough to allow water to flow. The ice maker in KitchenAid won’t make ice because of this. To function properly, it needs at minimum 20 PSI. Make sure that the pressure at the valve isn’t lower than 20 psi. Utilize a multimeter to confirm that the pressure of the water is sufficient. If the water valve is receiving enough power and pressure, however, the ice maker fails to produce ice, you should replace it.

KitchenAid Refrigerator Ice Maker Assembly

One component of the assembly may be damaged. You may have to replace the entire KitchenAid whole assembly of ice makers since not all components are sold as a set. Before replacing the assembly of ice makers, make sure to inspect the water line, the water inlet as well as the fan and water heater. If none of these parts are defective, and the freezer temperature is at least 15 degrees Fahrenheit, you can replace the ice maker assembly. Low water pressure from the house supply: Your home might have low water pressure. The valve that supplies water to the home provides water to the water dispenser as well as ice makers. In order to function correctly, the water inlet valve must be operating at a pressure of 20 psi. Examine the flow of water and then test the pressure to determine whether it’s at or above 20 psi.

Confirm that the KitchenAid Icemaker is on

Check that you have the KitchenAid Icemaker is on and that the arm or paddle is able to be moved freely. In-door ice-dispensing models require you to open the door to ensure the indicator light stays constant when the flap and door switch are pressed. KitchenAid Refrigerator door switch: The door switch switches off the Ice and water dispenser when the KitchenAid refrigerator’s door is open. The dispenser won’t start if the door switch malfunctions. Use a multimeter or a multimeter to test the continuity of the door switch. If the switch doesn’t be in a state of continuous operation, replace it.

KitchenAid Refrigerator Ice Level Control Board

Some KitchenAid refrigerators utilize an infrared beam to sense the amount of ice present in the ice bucket. If the ice levels are at the top of a bucket, the beam ceases to function. The control board turns off the icemaker. The control board instructs the icemaker to produce more ice in the event that the ice levels are below the beam. If the ice control board is not functioning and the ice maker stops making ice. Make sure that the power is available to the ice control board. If the power supply to the icemaker stops working make sure whether the ice controller board is functioning.

KitchenAid Refrigerator water filter

Clogged water filters can cause an obstruction in the flow of water to the dispenser and stop the ice maker working properly. Water quality and proper water flow must be ensured by the water filter, which is changed every six months.

KitchenAid Refrigerator Auger Motor

In the majority of KitchenAid refrigerators to correctly dispensing the ice, an auger motor will spin an auger blade to move the ice out of the ice bucket and into the dispenser ice chute. The auger motor could fail, causing the ice to stop moving and fall through the chute. This could give an appearance that the ice maker is not functioning. You can test the auger motor by pulling the bucket out and turning the bucket auger with your hand. If the auger turns freely, use an instrument to check the motor’s continuity in the electrical circuit. Replace the motor in case it doesn’t have continuity or isn’t running.

KitchenAid Refrigerators Ice Bucket

The ice bucket on many KitchenAid refrigerators has an independent auger motor to spin a blade and push the water out of the bucket. The ice bucket might be damaged if the motor turns but the ice doesn’t dispense. For cracks or excessive wear, check the motor of the auger, the ice bucket, and drive coupler. If necessary replace the ice bucket. KitchenAid refrigerators that do not make ice are a common issue. It could be caused by a variety of causes. If it’s a blocked water line, a malfunctioning ice maker, or a thermostat issue, there are several solutions that you can try to return your appliance to making the ice. You can diagnose the problem yourself by following the steps in this post. Regular maintenance such as cleaning the ice maker or making sure that there is no obstruction to the water line will aid in preventing future issues. This can also ensure that your KitchenAid refrigerator runs smoothly. If you’re in need of ice, don’t hesitate to take control of the situation and get your KitchenAid refrigerator back to good working in good working order.