Many households need a reliable Haier refrigerator that is able to offer plenty of Ice. If you require ice to drink, keep your food fresh, or even for entertaining guests, an efficient ice maker is a must-have. If, however, your Haier refrigerator stops making ice it could be frustrating and frustrating.
There are many reasons your Haier refrigerator won’t make the ice you want. This could be due to a blocked water pipe or a malfunctioning maker of ice. This article will discuss the most common causes for the ice maker’s failure, and provide steps for fixing it. You will be able diagnose the issue and get your refrigerator to making Ice quickly by following the instructions.
Common solutions to the problem: My Haier Refrigerator isn’t making ice
Haier Refrigerator Main Control Board
The Haier refrigerator’s main control board controls the voltage being sent to the maker of ice. The ice maker may stop functioning when it’s not in good shape. Examine the board for signs that suggest damage or a malfunctioning component. A multimeter can be used to verify that the voltage is reaching the ice maker. Temperature of the Freezer is above 10 degrees F (-12C) If the temperature of the freezer is higher than 10°F (-12C) and the ice maker won’t produce ice cubes efficiently. The ice maker must operate at a temperature between 0 and 5°F (-18 to 15C). If the temperature of the freezer is excessively high, make sure that the condenser coils remain clear of debris and the condenser fan is working properly. Check to make sure that no frost has formed on the tubes that evaporate. If the tubes of the evaporator are frozen, it is likely that part of the defrost process has failed.
Haier Refrigerator Water Inlet Valve
The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the valve for water is damaged or is not sufficiently inflated, water won’t flow through. The Haier Ice Maker won’t make any ice. The valve needs minimum 20 PSI to work properly. The pressure of the water should be at minimum 20 PSI. If the water pressure is adequate then utilize a multimeter to test for power coming to the valve that supplies water to. If the valve for water supply is supplying enough pressure and power but the ice maker isn’t making ice due to the lack of water, it must be replaced.
Haier Refrigerator Ice Maker Assembly
A component could be damaged. Since many of the components for ice makers are not sold separately, you may require replacing the entire Haier ice maker assembly. Before you replace the whole ice maker, check the water supply line, water inlet valve, and the fan. If you find that none of the parts are damaged, and the temperature in the freezer is not below 15 degrees Fahrenheit, then replace the entire ice maker assembly. Low Water Pressure in the Home Supply It could mean that there is not enough water pressure. The valve that supplies water to the home provides water to the water dispenser and ice makers. The valve that supplies water to the water dispenser needs at least 20 psi in order to function correctly. It is possible to check the water flow and determine the pressure by conducting a test.
Check that the icemaker is “On”
Make certain that the Haier is turned on and that the paddle or arm is able to move freely. For models with ice dispensers in the door, with the door open ensure that the indicator light stays in constant motion as the flap for the ice maker and door switch are pressed.
Haier Refrigerator Door Control
When the Haier refrigerator is opened the door switch turns off the ice and water dispensers. The dispenser will not start when the door switch is malfunctioning. It is possible to test the continuity of your door switch with the aid of a multimeter. Replace the door switch if it does not have continuity following activation.
Haier Refrigerator’s Ice Level Control Board
Some Haier refrigerators use an Infrared Beam to detect the amount of ice in the bucket. When the ice level reaches the top of the bucket, it interrupts the infrared beam. The control board shuts off the icemaker. If the ice level falls below the beam the control board instructs the maker to create more ice. If the ice level control board fails and the maker of ice will cease to make it. Make sure that the power source to your Ice Level Control Panel is functioning. Replace the control board for the ice maker if power is not getting through to the ice level control board.
Haier Refrigerator water filter
A clogged water filters can cause a restriction in the flow of water to the dispenser, which can make it impossible for the maker to function properly. The water filter must be replaced about every 6 months in order to ensure proper water flow and ensure water quality. A Haier Auger Motor are required to properly dispense Ice. The motor turns an auger shaft to move the ice from the bucket of ice. If the auger motor is damaged or burned out, the ice won’t be able to move forward or fall down the chute, giving the impression that the ice maker is not working. In order to determine whether the auger motor is damaged, take off the bucket of ice and turn the bucket auger by using your hands. To check for electrical continuity, you can use a multimeter to rotate the bucket auger by hand when it is turning freely. If the motor isn’t working or isn’t powered then replace it.
Haier Refrigerator Ice Bucket
On many Haier refrigerators, the ice bucket uses an auger motor that is used to spin an auger blade to push the frozen ice from the bucket and down the dispenser ice chute. If the motor of the auger is turning but the ice isn’t dispensing, the ice container may be damaged. If you notice cracks or wear, check the motor of the auger, ice bucket and drive coupler. If necessary replace the bucket. Haier refrigerators that do not make ice are a common issue. This can be caused by a variety of causes. There are many ways to assist your appliance produce ice again.
By following the step-by-step instructions provided in this post, you will be able to identify the issue and make the necessary repairs without needing professional help. Regular maintenance will help prevent future issues. This means taking care to clean the ice maker, and making sure the water lines are clean. You can be in control and have your Haier refrigerator running again the next time you need it.