Have you discovered that your Kenmore washer won’t start or has it stopped working altogether? This article will provide you a list of problems you should look out for prior to calling a technician for your washer. There are a few simple things that you can do to fix your Kenmore washing machine won’t start.
These might seem silly, but they could save you the trouble of calling a technician. Make sure that the power is switched on and that the machine is connected. Examine the outlet to confirm it’s functioning. Then, check whether a fuse was damaged or a circuit breaker thrown. If both of these work Check if the Delay Start button or Control Lock feature is activated. Sometimes, it is as easy as closing and opening the door to reset your Kenmore washer. These simple steps will save you money on unnecessary repairs, when your Kenmore washing machine doesn’t start.
How to fix Kenmore washing machine that won’t start
- Click the power button.
- Check out the outlet.
- If necessary, reset the outlet.
- Make sure that the power cord is plugged into.
- Verify that the circuit breaker has been thrown or fuses have been checked.
- Check to see if Delay Start was pushed.
- Check to see if the Control Lock is activated.
- When the cycle is complete, close and open the door.
In conclusion, if your Kenmore washing machine won’t start, there are several steps you can take to troubleshoot and fix the issue. First, check to make sure that the machine is properly plugged in and the outlet has electricity. Next, check the lid switch as well as the door lock to ensure that they are working correctly.
Also, ensure that the water supply is adequate and pressure is maintained.If none of the above steps can resolve the issue It may be necessary to consult an expert for assistance. Remember to always refer to the manufacturer’s instructions and consult an expert if you have any doubts or questions.