How To Fix A Frigidaire Refrigerator That’s Not Dispensing Ice

A refrigerator is a must-have appliance in any home. It keeps drinks cool and fresh. It is frustrating and irritating to have ice not dispersing. There are many reasons why a Frigidaire refrigerator might stop dispenseing ice, like a broken dispenser motor, an overflowing water filter, or a malfunctioning ice maker. In this article, we’ll discuss some common troubleshooting steps to assist you in fixing your Frigidaire refrigerator’s ice maker, and get it back functioning. You can save money by hiring a professional to take care of your appliance and never having to purchase a brand new one.

Frigidaire Ice Bucket Auger Motor

The Frigidaire Ice Bucket Auger is inside the ice box. If the dispenser is activated it will spin to move the ice upwards towards the chute that is at the outlet of the bin. The auger is driven by a motor that is positioned behind the bin, which is connected to a set of drive forks that are mounted on the shaft of the gearbox. Although the gearbox is not fast, it packs a lot of force to move ice. It is important to confirm that the motor works before you try to turn the auger. It is common to hear the motor/gear box making enough noise to be heard when the freezer door shut.

If the motor is not working, you can test it for continuity with an multi-meter. Disconnect the appliance’s power before conducting this test. If the motor has continuity, then you must confirm that it is receiving power when the ice dispenser is selected. This is live voltage testing that is only performed by trained personnel. You must inspect the switch and actuators for control in the event that no power is connected to the motor’s terminals.

Frigidaire Ice Dispenser Actuator

The ice dispenser actuator is the component that activates the dispenser micro switch. It’s typically a plastic lever that moves when it is pressed by the tumbler, and it may be covered with a soft plastic pad. You will usually hear an audible click when the switch is activated. You must inspect the actuator or switch if the door to the dispenser and auger motor are not receiving energy. Uncover the control panel and check that the actuator connects to the dispenser switch properly and if not, look at the bracket for housing the actuator, the bracket that mounts the switch, and the pivot for the actuator. Repair any damaged or damaged parts. If the actuator is not contacting the switch, then you’ll need to check the switch or control board to find the source of the problem. If you are working near electrical circuits, it is recommended to unplug the power supply from the appliance.

Frigidaire Micro Switch

The micro switch on the dispenser is a contact-based momentary switch that , when activated supply power to the motor of the auger and also the solenoid to the door of the dispenser. It is located behind the lever or pad which is pressed to dispense the ice. To open the switch, first turn off the power supply. After that, remove the cover from the control panel. Multi-meters can be used to verify continuity.

Frigidaire Dispenser Control Board

Some models of Frigidaire refrigerators feature an electronic control to supply electricity to the motor and dispenser door solenoid. It could be that the controller is defective. Frigidaire electronic controller if you do not get electricity and the actuator or switch isn’t functioning correctly.

In conclusion it is clear that a Frigidaire refrigerator that’s not producing frozen ice is a difficult issue to tackle There are plenty of options to consider before making a call to a professional. Fix the issue yourself by following the steps in this article. This will help you save time and money. Take the time to check the dispenser’s water filter and motor for any faults. Be patient while waiting for fresh ice to be created. With a little effort, you can restore your Frigidaire refrigerator back to making the same ice as it does, which will ensure the drinks are cool and refreshing all through the year.