The KitchenAid refrigerator water inlet valve is an important part that supplies water for the ice maker and water dispenser. It is prone to problems such as low water pressure, no ice production, leaks, and no water ice. So, identifying a malfunctioning KitchenAid water inlet valve in your refrigerator is vital to ensure proper functioning of your fridge. In this post, we’ll provide you with a step-by-step guide that will help you determine if you have an issue with your KitchenAid refrigerator water inlet valve, highlighting common symptoms to look out for and the simple tests you can run to pinpoint the issue. This article will help you save time and money by helping you to determine the cause and then possibly fix the issue.
Where can I find the KitchenAid refrigerator valve for the water inlet?
Unplug the power cord to check the KitchenAid refrigerator’s water tank. Turn off the water supply for the refrigerator. A majority of foods can be stored in the refrigerator until they are closed. The valve will have to be monitored every 30 minutes. Wear work gloves to protect your hands. The water valve is normally found at the bottom rear of the KitchenAid refrigerator. The KitchenAid water valve may fail either electrically or mechanically.
Examine the valve for electrical issues
To determine if there is an electrical problem, you must open the KitchenAid water valve in the refrigerator that is normally located at the bottom of the cabinet. Make use of an analog or digital multimeter to test continuity and good electrical current of the solenoid coils.
Remove the supply line for water connected to the valve, and remove the cables from the terminals located on the solenoid coils. Each model will have two terminals, so the number of coils may vary.
Set the resistance setting to the most minimal Ohms and calibrate the multimeter correctly.
Install a probe on one terminal and then place the second probe on another terminal. Make this process happen for every solenoid coil.
If the meter reads infinity Ohms resistance, but the digital display is not changing or the needle doesn’t move on the analog meter, the valve is not working properly and has no continuity.
Inspect the valve for any indications of mechanical damage
To determine whether there’s an issue with the mechanical water valve, it’s simpler to determine if there is a water supply issue.
Connect the water supply line to the KitchenAid water valve.
Install a bucket beneath the water supply line.
Connect the water supply line to test the flow.
The issue may be with your water supply if the flow of water is weak or irregular. If the flow is consistent and steady it could indicate that the KitchenAid water valve is blocked or obstructed.
In the end, a malfunctioning KitchenAid water inlet valve may result in a myriad of issues that could affect the operation of your refrigerator’s ice maker or water dispenser. You can determine the cause and possibly fix it yourself by following the steps in this article. Be sure to take the proper safety precautions when working with electrical equipment and water. If the issue continues to persist, or you’re not sure how to perform the tests and tests, you’re advised to consult an expert technician. You can keep your refrigerator’s water valve in good working order and make sure it is supplying you with freshly-watered, clean water and frozen ice for years.