How To Diagnose A Faulty Inglis Refrigerator Water Inlet Valve

A Inglis refrigerator water inlet valve a crucial part that supplies water for the water dispenser and ice maker. If it malfunctions, it can result in several issues like no ice making and low water pressure or leaks. It is vital to recognize the source of a Inglis refrigerator’s water inlet valve issue. This will ensure that your refrigerator operates properly. In this post, we’ll provide you with a step-by step guide to help you diagnose the issue with a defective Inglis refrigerator’s water inlet valve. This will include some of the common signs to look for and simple tests you can perform to identify the problem. This article can help you reduce time and costs by helping you to diagnose the problem and perhaps fix it.

Where can I find the Inglis refrigerator’s water intake valve

Unplug the power cord in order to check the Inglis refrigerator’s water tank. After that, shut off the water supply for the refrigerator. Most food items will be safe if left in the refrigerator, as long as the doors remain closed and power shut cut off for around 30 minutes while checking the valve. Use gloves for work to protect your hands. The water valve is typically located in the rear of the bottom of the Inglis refrigerator. The Inglis water valve may fail either electrically or mechanically.

Examine the valve for electrical problems

It is possible to check for an electrical issue through the Inglis refrigerator’s water valve, which is usually situated on the bottom of the cabinet. To test the continuity of electrical currents of the solenoid coils use either an analog or digital multimeter.

Remove the water supply wire from the valve. After that, disconnect the wires from the terminals on the solenoid coils. Every model comes with two terminals. Therefore, the number of coils vary.

Set the multimeter at the lowest Ohms of resistance setting and be sure that the meter is calibrated properly.

Put a probe in one terminal, and place the other probe on another terminal. Repeat this for each solenoid coil.

If the meter measures infinite Ohms of resistance – the display on a digital gauge is not very different or the needle on an analog meter is unable to move, then the valve has no continuity , and it is bad.

Inspecting the valve for mechanical malfunction

It is the easiest method to determine if there is a problem with the water supply in order to look for mechanical problems.

Disconnect the water supply line from the Inglis water valve.

Put a bucket underneath the water supply line.

The water supply line to monitor the flow.

If the water’s flow is uneven or intermittent It could be a problem with the water supply. If the flow is steady and constant it could indicate that the Inglis water valve is blocked or obstructed.

A damaged Inglis water valve could cause a wide range of problems that could impact the water dispenser of your refrigerator and ice maker. However, by following the step-bystep procedure outlined in this post, you can determine the issue and solve it yourself without needing to call a repair service. Always take safety precautions when working with electrical components or water. If the issue continues to persist, or you are unsure how to test it you should consult an experienced technician. Keep the water valve on your refrigerator in good order and ensure that it has fresh, clean water as well as Ice for a long time.