A Haier refrigerator water inlet valve is an essential component that supplies water to the water dispenser and ice maker. If it fails the result could be many issues, including no ice production and low water pressure or leaks. It is vital to recognize the Haier refrigerator’s water inlet valve malfunction. This will ensure that the refrigerator functions properly. This article will provide an easy-to-follow guide to assist you in diagnosing a malfunctioning Haier refrigerator’s water inlet valve. The guide will also outline common symptoms and tests you can use to determine the cause. This article can help you save time and money by helping you to pinpoint the issue and perhaps fix it.
Where can I find the Haier refrigerator valve to let water into the refrigerator?
For a check of the Haier refrigerator water valve, disconnect the power cord and turn off the water supply to the refrigerator. A majority of foods can be stored in the refrigerator for as long as they are shut. The valve will need to be checked at least every 30 minutes. Use gloves for work to safeguard your hands. The water valve is usually located in the bottom back of the Haier refrigerator. The Haier water inlet valve can malfunction either mechanically or electrically.
Check the valve for electrical issues
To check for an electrical issue, open the Haier refrigerator water valve usually located in the rear of the bottom of the refrigerator cabinet. To test the continuity of electrical current in the solenoid coils, employ an analog or digital multimeter.
Connect the water supply line connected to the valve. Also, disconnect the cables from the terminals located on the solenoid coils. Every model comes with two terminals, and the number of coils may differ.
Set the resistance to the lowest Ohms, and then calibrate the multimeter in a proper manner.
Place one probe on each terminal, then place the second probe on the opposite terminal. Repeat this for each solenoid coil.
If the meter measures infinity Ohms of resistance, and the display on a digital gauge doesn’t change much, or the needle of an analog meter fails to move, the valve is in no continuity , and it is bad.
Check the valve for signs of mechanical malfunction.
If you want to check for any mechanical issues with the water valve, it’s easiest to eliminate a supply water problem.
The water supply line must be disconnected to the Haier water valve.
Place a bucket under the water supply line.
Switch on the water at the line for supply, and examine the flow.
If the water flow seems irregular or weak it could be due to the supply of water. If the water flow is constant and strong, it could indicate that the Haier water valve is blocked or obstructed.
A faulty Haier water inlet valve could result in a myriad of issues that could affect the operation of your refrigerator’s ice maker as well as water dispenser. You can identify the issue and perhaps fix it yourself using the methods in this article. Always ensure you are safe while working around electrical components or water. If the problem persists or you aren’t at ease performing the tests, it is always recommended to seek out a professional technician to get help. You can ensure that the water valve on your refrigerator in good order and ensure it provides you with fresh, clean water and frozen ice for years.