Why Doesn’t My Hotpoint Washing Machine Work At All

Why Doesn’t My Hotpoint Washing Machine Work At All

Begin by determining if the Hotpoint washer isn’t responding. Does the circuit have a problem? It is possible to determine whether the circuit is causing the trip by plugging in a hair dryer into the outlet. If the hair dryer does not function, the wiring inside the outlet could be the cause. Contact an electrician to repair the electrical outlet.

The problem with the wiring could be in the washer if the hair dryer does not work. Check these steps to verify the wiring in the Hotpoint washing machine.

  1. Unplug the Hotpoint washer. Make sure to examine the power cable for damage. If the power cord is damaged, you should replace it.
  2. Verify the wiring connections on the main control or timer board. Connect any loose wires.
  3. If your Hotpoint washer features digital displays, verify the wire connections between the control board that controls the washer and the board for the user interface. Connect any wires that are loose to the user interface. There may be a need to replace either the control board that controls your main appliance, or the user interface board in the event that the wiring connections are in good order.


Before replacing the control components, it’s a good idea to have an Hotpoint service technician examine the Hotpoint washing machines control boards and user interface boards. Testing the controls typically requires live voltage tests. We wouldn’t recommend you conduct a live voltage test for your Hotpoint washer on your own because these tests are dangerous. Replace the Hotpoint washer’s main controller board. The main electronic control board (also called the mother board) determines the execution and timing of the washer’s component functions. It regulates the fill valves as well as the drive motor, and the drain pump.


Change the Hotpoint washer timer:

The timing device -often referred to as a cycle selector — is the dial used to set the cycle for the Hotpoint washing machine using mechanical controls. The washer moves through its cycles from its initial filling until the final spin with the timer. Replace the timer if it doesn’t advance the washer through its cycle. Replace the Hotpoint washer’s user interface board. The user interface board is comprised of the buttons you need to use to start the wash cycle. If any or all of the buttons are not working, replace the user interface board.

In conclusion, a Hotpoint washing machine that doesn’t work even once can be a traumatic and overwhelming problem to resolve. The homeowner can fix many reasons why Hotpoint washing machines doesn’t work. The article covered some typical reasons behind the Hotpoint washer that is not working, like water supply, power supply, and control issues. They also gave step-by-step directions on how to fix the issue. Be sure to unplug the Hotpoint washing machine before you attempt any repairs.

If you’re unsure about any part of the procedure you should go through the manual of the manufacturer or consult a professional assistance. With a bit of time and patience and a little patience, you’ll be able to have your washer working flawlessly without any hassle and avoid the expense of repairs. Sometimes, the issue is more complicated. In such cases, it is better to get a professional to assist you immediately.