For those of you with a Roper washing machine, you probably know the stress, headache, and costs when it you learn that your Roper top-load washer won’t fill up. First make sure that your washing machine from Roper does not have the water valves leaking, or if you have a kink in your water hose. Water is essential for top-load Roper washers to function properly.
If it isn’t filling up with water, then you know that something is wrong with your Roper washer. You can easily check for the problem. Be careful your home could flood when you make a mistake. For more information on how to take care of your appliance, ensure that you refer to the manual for the owner.
What To Do When Roper Washing Machine Will Not Fill?
- Make sure the lid is closed completely
- Check that hot and cold water are available.
- Check to see if the fill lines are kinked.
- Verify that the water inlet screens have not become blocked.
In order to do this properly switch off the water. Then, remove the fill hoses , and then clean your screens. Don’t remove them, as they could cause flooding. Turn the water on again, and then reinstall the hoses. Check for leaks. If your top-load Roper washer is still not filling with water, it’s time for a repair. Hopefully this information has helped with understanding some of the possible causes behind your washing machine that won’t be able to fill up with water.