My Samsung Refrigerator Is Not Making Ice

Having a reliable Samsung refrigerator that provides ample ice is vital for many households. If you require ice to drink, keep your food in good condition, or even for entertaining guests, an efficient ice maker is a must-have. However, when your Samsung refrigerator isn’t making ice, it could be frustrating and inconvenient. There are several reasons that your Samsung refrigerator could not produce the ice you need.

This article will go over the most common causes of ice not being made in refrigerators made by Samsung. We also provide steps to fix them. With the information and guidance provided, you’ll be able to identify the problem and get your refrigerator back to producing Ice within a matter of minutes.


Common solutions to the problem: My Samsung Refrigerator isn’t making ice


Samsung Refrigerator Main Control Board

The Samsung refrigerator’s main control board controls the voltage being transmitted to the ice maker. The ice maker may not work if the control board is damaged. Inspect the board for any indications of damage or an issue with the component. A multimeter is a good tool to verify that voltage is reaching the ice maker. Freezer Temperature above 10 ° F (-12C). Ice makers won’t work properly if the temperature in the freezer is higher than 10°F (-12C). The temperature of the freezer must be maintained between 0 and 5 degrees Fahrenheit (-18 to 15C) for the maker to function effectively.

The temperature of the freezer should not be too high. Also, ensure that the condenser fan is functioning properly and there is no dust on the condenser coils. Check to make sure that no frost has built up on the tubes that evaporate. The defrost mechanism could have failed in the event that the evaporator coils have are covered in ice.


Samsung Refrigerator Water Inlet Valve

The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it is not able to hold enough pressure, it will not let water flow through. Therefore, the Samsung ice maker will not produce ice. For the valve to work correctly, it must be at minimum 20 PSI. Make sure that the pressure at the valve isn’t less than 20 psi. Utilize a multimeter to confirm that the pressure of the water is sufficient. If the valve for water inlet has sufficient pressure and is receiving power, but the maker isn’t filled with water in order to make ice, replace the water inlet valve.


Samsung Refrigerator Ice Maker Assembly

A component of the ice maker assembly could be defective. Since many of the components for ice makers are not available separately, you might need to purchase and replace the whole Samsung Ice Maker Assembly. Before replacing the ice maker assembly, be sure you examine the valve for water inlet and the water line. If you find that none of the components are defective and the temperature of the freezer is not less than 15 degrees Fahrenheit, then replace the entire ice maker assembly.


Low Water Pressure from House Supply

The home might not have enough water pressure. The valve that supplies water to the inlet pipe provides water to the ice maker and water dispenser. The valves for water inlet must function at minimum 20 psi. You can test the flow of water and find out the pressure by conducting a test. Verify that the Samsung’s icemaker been turned on. The arm or paddle should be able to move around freely. For models with ice dispensers in the door, with the door open ensure that the indicator light stays in constant motion when the ice dispenser flap and door switch are pressed.


Samsung Refrigerator Door Control

When the Samsung refrigerator is opened the door switch turns off the ice and water dispensers. If the switch fails, the dispenser will not start. A multimeter can be used to check for continuity to determine if the door switches are defective. If the door switches do not have continuity, it is best to replace the switches.


Samsung Refrigerator Ice Level Control Board

Some Samsung refrigerators utilize infrared beams to determine the amount of ice in the bucket. The infrared beam is cut off when the ice layer is at the top. The control board shuts the maker of ice. The control board instructs the icemaker to produce more ice in the event that the levels of ice are below that beam. If the ice control board fails to function, the icemaker will stop making ice. Check that the ice-level control board is powered on. Replace the ice-maker control board in the event that power isn’t being received by the ice level control board.


Samsung Refrigerator Filter

Blockage of the water filter could block water from flowing into the dispenser. This will make the ice maker not work effectively. The water filter should be replaced every 6 months in order to ensure the proper flow of water and to make sure that the water is of good quality.


Samsung Refrigerator Auger motor

An auger engine is required to efficiently dispensing ice in many Samsung refrigerators. The blade spins and pushes the frozen ice from its container. If the motor for the auger is damaged or burned out, the ice won’t be able to move forward or fall down the chute, giving the impression that the ice maker is not functioning properly. If the auger motor isn’t functioning, remove the bucket of ice and turn manually the bucket. If the auger turns freely, use an instrument to check the motor’s continuity in the electrical circuit. Replace the motor in case it isn’t in continuity or isn’t running.


Samsung Refrigerators Ice Bucket

The ice bucket on many Samsung refrigerators uses an auger motor that is independent to spin a blade, and push the water from the bucket. The ice bucket could be damaged if the motor turns but the ice doesn’t dispense. For cracks or excessive wear, check the motor of the auger, ice bucket and drive coupler. If necessary, change the bucket.

In conclusion, the issue of a Samsung refrigerator that is not producing ice is a typical issue that is caused by a range of causes. There are a variety of things that can be done to bring back ice production in your Samsung refrigerator, such as a clogged water pipe, an ice maker that is not working properly or a thermostat problem. You can diagnose the problem by following the steps in this article. Regular maintenance, like clearing the ice maker of debris and making sure that the water line isn’t blocked, can help prevent problems in the future and ensure that your Samsung refrigerator is operating smoothly. Don’t hesitate to call Samsung when you require ice.