My Kenmore Refrigerator Is Not Making Ice

A reliable Kenmore refrigerator that is stocked with Ice is an essential item for every household. An efficient ice maker is vital for any household, whether you use it to prepare drinks, preserve food or host guests. It is frustrating and annoying to have Kenmore refrigerators to stop making the ice. There are many reasons your Kenmore refrigerator isn’t making ice. This could be due to a blocked water pipe or a malfunctioning ice maker. This article will discuss the most common reasons for ice not making in Kenmore refrigerators. We will also give steps to fix the problem. The advice and information will allow you to identify the issue quickly and repair your refrigerator to make Ice once more.

Common solutions for: My Kenmore Refrigerator is not making Ice

Kenmore Refrigerator Main Control Board

The Kenmore refrigerator’s main control board regulates the voltage that is transmitted to the ice maker. The ice maker may cease to function when the control panel is not in good working order. Inspect the board for any signs of damage, or a defective component. A multimeter can be used to determine if the voltage is reaching the ice maker. Temperature of the freezer above 10 degrees F (-12C). The Ice maker will not produce ice cubes if the temperature of the freezer is greater than 10 degrees Fahrenheit (-12C). The freezer temperature must be maintained between 5 and 0 degrees Fahrenheit (-18 to 15C) to allow the maker to function effectively. Make sure that the temperature of the freezer isn’t too high, and that the condenser fan works correctly. Also, you should determine if there is a build-up of frost on the coils of the evaporator. The defrost mechanism could be malfunctioning if the evaporator coils are covered in ice.

Kenmore Refrigerator Water Inlet Valve

The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. It will not allow water to flow through if the water inlet valve is damaged or is not in good condition. Kenmore’s ice maker will not make ice because of this. To work properly, the valve needs to have at least 20psi. Check that the pressure of water for the valve is at least 20 psi. Use a multimeter to verify that the water pressure is sufficient. If the water inlet valve has sufficient pressure and is getting electricity however the maker isn’t filled with water to make ice, replace the valve that supplies water to the maker. Kenmore Refrigerator Ice Maker Assembly – One component might be damaged. Since many of the components for ice makers are not sold separately, you may require replacing the whole Kenmore ice maker assembly. Before you replace the whole ice maker,, check the water supply line, the water inlet valve and fan. If you discover that none of the components are damaged and the temperature of the freezer isn’t less than 15 degrees Fahrenheit, then replace the entire ice maker assembly.

Low Water Pressure from House Supply

The house may have insufficient water pressure. The water inlet valve supplies water to the water dispenser as well as ice makers. The valves for water inlet must function at least 20 psi. Check the water flow and test the pressure to see if it is at least 20 psi. Check that the icemaker is “On”: Make certain the Kenmore is turned on and that the paddle or arm is able to move freely. For models with ice dispensers in the door, with the door open make sure the indicator light stays on steadily as the flap for the ice maker and switch for the door are pressed. Kenmore Refrigerator Doors Switch: This shuts off the water dispenser when Kenmore refrigerator’s doors are open. The dispenser won’t start when the door switch is malfunctioning. Use a multimeter or a multimeter to check the integrity of the door switch. If the switches don’t have continuity, it is best to replace them.

Kenmore Refrigerator Icing Level Control Board

Some Kenmore refrigerators use a infrared beam for detecting the level in the ice bucket. The infrared beam is cut off as the ice layer is at the top. The control board shuts off the machine. The control board tells the icemaker that the ice layer is dropping to below the beam. The ice maker will cease making ice when the ice level control board is down. Ensure that the ice level control board is receiving electricity. Replace the ice-maker control board in the event that power isn’t getting through to the icelevel control board.

Kenmore Refrigerator Water Filter

A clogged water filter can hinder the flow of water to the dispenser and prevent the ice maker from working effectively. Water quality and proper water flow should be ensured by the water filter, which should be changed every six months. An auger motor for Kenmore Refrigerators This will let many Kenmore refrigerators dispense ice properly. It turns an auger blade which moves the ice out of the bucket to the chute. The motor that spins the auger could be defective or worn out and the ice may not be able to move into the chute. This could create the illusion that the ice maker is not function properly. In order to determine whether the motor is damaged, take out the ice bucket, then turn the bucket auger by hand. If the auger turns freely, you can use an instrument to check the auger motor for electrical continuity. If the auger motor does not have continuity or is receiving power, but it won’t run and isn’t turning, you need to replace the motor.

Kenmore Refrigerators Ice Bucket

The ice bucket that is found on several Kenmore refrigerators has an independent auger motor to spin a blade, and force the water out of the bucket. The ice bucket may be damaged if the motor stops turning and the ice doesn’t disperse. Check the auger, ice bucket and drive coupler for cracks or excessive wear. If needed replace the ice bucket. In the end the conclusion is that the issue of a Kenmore refrigerator that is not making ice is a common issue that is caused by a variety of factors. There are a variety of ways to assist your appliance produce ice again. You can diagnose the problem by following the instructions in this article. Regular maintenance such as cleaning the ice maker and ensuring that the water line does not get blocked can prevent future problems and keep your Kenmore refrigerator operating smoothly. You can be in charge and get your Kenmore refrigerator running again when you next need it.