How to Fix Whirlpool Washer That Has No Hot or Cold Water

A Whirlpool washer that’s not working correctly can lead to a variety of issues, particularly when it doesn’t have cold or hot water. It can be a hassle to wash your clothes that are dirty and can cost a lot to employ a professional to solve the issue. A lot of issues related to hot or cold water of the Whirlpool washer can be fixed by the home owner.

We’ll discuss the most common causes that your washer isn’t running hot or cold water, and provide step-by-step solutions. We’ll help you fix the thermostat as well as check the supply of water. It can save you money by not having to fix the washer that isn’t warm or cold. Inlet Screens and Hoses:Whirlpool washers are connected to the water supply by fill hoses. They typically measure around 4 to 5 feet in length and feature wire mesh or a plastic screen on the end which connects to the faucet. The screen prevents debris from entering the water valve of the appliance. It’s located at the back of the hose. How to check the condition of yourWhirlpool washing machine’s filters and hoses:

  1. Begin by ensuring that the faucets and hoses are in good condition.
  2. Switch off the faucets and disconnect the lines of fill from the inlet valve, and examine the screens. It is recommended to clean out any dirt or debris. To ensure that you have enough water pressure to fully fill your hoses, place the ends of the hose into the bucket or tub and switch on the faucet.
  3. Examine the hose’s screens for dirt or damage in the event that you do not have enough pressure.
  4. It is recommended to replace screens and hoses by Whirlpool If you discover any problems during these examinations.


Water Inlet Valve

The Water Inlet valve in your Whirlpool washing machine provides cold and hot water to washing and rinse. Two solenoids control the inlets , which supply cold and hot water. The valve can be controlled by a electronic control, timer, and the water temperature cycle selector. The electronic control, timer water temperature/cycle selector, and water level/pressure switches regulate the valve. How do you check the valve that opens water for the Whirlpool washing machine using the aid of a multimeter.

  1. Before beginning this test ensure that the washer is off of the power and water supply. 2. To take the valve out to test it, you’ll have to remove all or a portion of the Whirlpool washer cabinet. The valve is just behind the hose connections.
  2. Examine The Whirlpool washer’s valve to see if there is cracks, wear or damage. There could be screens inside the valve that are blocked by dirt and other debris. If this occurs it’s best to cleanse it thoroughly. In the event of damage, you’ll have to replace the entire valve.
  3. The resistance of a properly operating valve may vary between models. Check the manual to determine the correct reading. Set the probes on the valve’s terminals using the RX1 setting on your multimeter. If you do not see continuity, you could use the Whirlpool replacement valve for the inlet.


Lid switch

The lid switch on top-load Whirlpool washing machine is a security device that stops the motor circuit from operating in the event that the lid is open. Certain models also come with an inlet valve circuit that is controlled. The models come with an auxiliary switch on the lid that regulates the power source. It is recommended to inspect the lid switch in the event that the water inlet valve on your Whirlpool washer is not receiving the power. How to test the switch that controls the lid on the lid of aWhirlpool washer:

  1. Before starting, be sure that the Whirlpool washer is unplugged. 
  2. In order to locate the switch,, you have to remove the cabinet or top panel. When you have located it, ensure that the actuators and levers aren’t damaged or stuck. Also, make sure that the switch is operating mechanically.
  3. If there is no issue then you can take off the switch to test for continuity. Set your multimeter to RX1 to verify.
  4. Press the button to turn on the switch. Then you can use the probes to contact the terminals. The probes should be able to touch the terminals at a pressure between zero and almost zero.
  5. If you receive an error reading of near or zero, you’ll have to replace the Whirlpool lid switch.


Selector Swap or Water Temperature Switch

The selector switch, also known as a water temperature switch, determines the temperature of water to be used during the wash and rinse portions of the cycle. The switch serves to supply power to the appropriate solenoids on the water inlet valve. The temperature selector switch may be the cause of the issue in the event that you do not have electricity to the solenoids on the valve that opens water. What to do to test the Whirlpool washing machine selector switch using the aid of a multimeter It is necessary to disconnect the Whirlpool washer:

  1. First before you are able to test it and take out electrical components.
  2. To test the appliance, take off the switch that controls your selector. It is also necessary to dismantle all or any of the cabinetry in your washer. It’s usually connected to the frame of the Whirlpool washer machine.
  3. Every button of the switch is going to be examined individually. Begin by placing probes on the terminals of one button. The reading should be infinity. Then, press the button to switch to zero. After that, press the button to switch the reading back to infinity.
  4. If you find that your readings do not match the descriptions above You will have to change your selector switch by Whirlpool.


Water Pressure Switch

The water level switch, which forms part of the circuit for water valves it is a pressure activated device. The control panel is likely to contain this component. It is connected to the tub via either a hose or an air dome tube. The switch is located beneath the tub in Whirlpool washers that have electronic controls. The switch could stop providing electricity to the valve for water supply in the event of a malfunction. How to test the level of water on theWhirlpool washer machine:

  1. Before you begin, disconnect the power source from the Whirlpool appliance. 
  2. A malfunctioning air dome or switch could cause similar symptoms to the malfunctioning switch. The cabinet of your washer should be opened to locate the issue and then remove the air dome hose. Close one end, then blow the other one while it’s submerged in the water. There shouldn’t be any bubbles evident.
  3. To check the appliance for indications of wear, cracks or damage, or any other problems take the switch off. It is likely to be in the sump under the tub or behind the control panel.
  4. It is possible to require a new water level switch from Whirlpool in the event that you find any issues while conducting the above tests.


Electronic Control

The electronic controller or timer can be used to regulate the time that the valve for water inlet receives electricity. A set of electrical contacts are the basis of the mechanical timer. The contacts are controlled by tiny motors as well as cams. The contacts provide electricity to the water inlet valve circuit throughout the rinse, fill and rinse parts of the cycle. How do you check the timer control on theWhirlpool washer using a multimeter To find the timer, disconnect your Whirlpool washer and remove the control panel and the rear panel. 

  1. The timer must be taken off of your Whirlpool washer.
  2. Do not pull on the wires directly, but instead, pull on the connectors.
  3. Set the probes on the motor’s terminals. The test for continuity will give you a reading from zero to close to zero. 
  4. You’ll need a new Whirlpool timer in the event that the results of your tests are different. A Whirlpool washer that doesn’t have hot or cold water can be an annoying issue that may be challenging to resolve, but the solution is usually quite easy. It is possible to identify common issues like clogged pipes, malfunctioning valves or incorrect temperature settings for your water by following the instructions in this post.


Before making any repair to your Whirlpool washer, disconnect it. If you have any concerns you should consult the manual or consult a professional. It is possible to repair your Whirlpool washer back in working order quickly and efficiently with just a bit of patience and time. This will spare you the trouble of washing your clothes as well as the cost of repairs.