A refrigerator is a must-have appliance in any house, as it keeps our drinks and food cold. When it stops dispenses the ice, it could be annoying and unsettling. There are a few reasons why your Haier refrigerator may stop dispensing ice, such as a faulty dispenser motor, an overflowing water filter or an inoperable ice maker. In this article, we’ll go over some of the common troubleshooting methods to help you fix the issue with your Haier refrigerator’s ice dispenser and get it back functioning. With a bit of know-how, you’ll save money on a repair and avoid the expense of purchasing a new appliance.
Haier Ice Bucket Auger Motor
The Haier Ice Bucket Auger can be found in the ice bin. If the dispenser is activated it will rotate to push the ice to the bin’s outlet chute. The motor is attached behind the bin and set drive forks is attached to the gearbox’s shaft shaft. Although the gear box is not fast, it packs a lot of force to move the ice. You should verify whether the motor is operating before you try to turn the auger. The gear box or motor usually makes enough sound that you are able to hear it even with the freezer door shut.
If the motor isn’t operating then you can check the continuity of the motor using an instrument such as a multi-meter. Disconnect the appliance’s power prior to performing the test. If the motor has continuity, then it is important to confirm that the motor is getting power when ice dispensing is selected. This is live voltage testing and should only be performed by a certified person. If there is no power delivered to the motor’s terminals, you need to check the control actuator and switch.
Haier Ice Dispenser Actuator
The component that acts as a mechanical trigger for the micro switch in your dispenser is called the ice dispenser actuator. The actuator is typically tiny plastic lever that pivots when your tumbler is pressurized. It may also be covered by an upholstered pad. The switch usually clicks when it is struck. It is recommended to inspect the actuator or switch if the dispenser door as well as the auger motor aren’t receiving energy. Uncover the control panel and make sure that the actuator is in contact with the switch correctly. if not, look at the bracket for housing the actuator, switch mounting bracket and the pivot of the actuator. Repair any damaged or damaged parts. If the actuator is connecting to the switch, you will have to look at the control board or switch for the root of the problem. If you are working near electrical circuits, it is recommended to unplug the power supply from the appliance.
Haier Micro Switch
Momentary contact switch, also known as micro switch for the dispenser, is used to start the auger motor. It is located behind the lever or pad which presses to release ice. It is necessary to turn off the from the appliance the power source and then remove the cover on the control panel in order to open the switch. A multi-meter can be utilized to verify continuity.
Haier Dispenser Control Board
Haier refrigerators can use an electronic control to supply power to the auger motor or dispenser door solenoid. You may have a defective Haier electronic controller when they aren’t getting power and the actuator or switch is not working properly.
In the end, a Haier refrigerator that’s not dispensed frozen ice is a difficult trouble to solve however, there are a variety of possibilities to explore before getting a professional. By following the suggestions in this post, you can diagnose and resolve the issue yourself, saving time and money in the process. Check the dispenser’s water filter and motor for any problems. Also, be patient while waiting for fresh frozen ice to be produced. You can get your Haier refrigerator to continue to dispense regular ice with minimal effort. This will ensure that your drinks stay cool and refreshing all season.