The Speed Queen refrigerator water supply valve is an essential component. It provides water to the water dispenser and ice maker. When it malfunctions, it can result in several issues including no ice production, low water pressure, or leaks. So, identifying a malfunctioning Speed Queen water inlet valve in your refrigerator is vital for the efficient operation of your refrigerator. This article will provide steps-by-step directions that will aid in identifying a damaged Speed Queen water inlet valve on your refrigerator. It will also cover typical symptoms and tests that you can use to determine the issue. After reading this guide, you’ll be able to identify and fix the issue which will save you both time and money when you hire an repair service.
Where can I find the Speed Queen fridge water inlet valve
To check the Speed Queen refrigerator water valve, disconnect the power cord and shut off the supply of water to the refrigerator. Many foods can be stored in the refrigerator for as long as they are shut. The valve has to be checked every 30 minutes. Wear work gloves to guard your hands. The water valve is usually located in the bottom back of the Speed Queen refrigerator. The Speed Queen water valve may be damaged electrically or mechanically.
Examining the valve to determine if it has an electrical issue
It is possible to check for an electrical issue through the Speed Queen refrigerator’s water valve typically found in the lower part of the refrigerator cabinet. Utilize an analog or digital multimeter for checking continuity-good electrical current of the solenoid coils.
The water supply wire must be disconnected from the valve. Then, disconnect all wires that connect to the terminals of the solenoid coils. Each model will have two terminals. Hence, the number of coils may differ.
Set the resistance to the lowest Ohms and calibrate the multimeter properly.
Put a probe in one of the terminals and place the other probe on another terminal. Repeat this procedure for each solenoid coil.
If the meter is measuring infinite Ohms of resistance, the display on a digital meter does not change much or the needle of an analog meter does not move- the valve has no continuity , and it is bad.
Inspect the valve for any signs of mechanical failure
To check for any mechanical issues with the water valve, it’s easy to identify a water supply issue.
The water supply line must be disconnected from the Speed Queen water valve.
Set a bucket on the water supply line.
The water should be turned on to the supply line and examine the flow.
The problem may be in your water supply if water flow isn’t as strong or inconsistent. An uninterrupted, continuous flow could mean that the Speed Queen valve has become restricted or clogged.
A malfunctioning Speed Queen water valve can lead to a variety of issues that may affect the water dispenser in your refrigerator as well as the ice maker. If you follow the step-bystep procedure outlined in this article, it is possible to find the issue and repair it yourself, without having call a repair technician. Always take safety precautions when working around electrical equipment or water. If the issue persists or you don’t feel at ease performing the tests, it is always recommended to seek out a professional technician for assistance. By taking care of your refrigerator’s water intake valve, you can be sure that it functions efficiently and give you freshly-made, clean tasting water and frozen ice for many years to the future.