A GE refrigerator water inlet valve a vital element that supplies water to the water dispenser and ice maker. It is prone to problems like low pressure as well as no ice creation, leaks and even no ice. So, identifying a malfunctioning GE water inlet valve for your refrigerator is essential to ensure the optimal functioning of your fridge. In this article, we will provide you with a step-by step guide to help you diagnose a faulty GE refrigerator water inlet valve. We will also provide typical signs to look for and simple tests you can carry out to find the issue. This article can help you save time and money by allowing you to determine the cause and then possibly fix it.
Where can I locate the GE refrigerator water inlet valve?
Unplug power to test the GE refrigerator water tank. Then, turn off the refrigerator’s water supply. Most food items will be safe to be stored in the refrigerator so long as the doors remain closed The power will be turned off for about 30 minutes after checking the valve. Use gloves for work to guard your hands. The water valve is usually found at the bottom back of the GE refrigerator. The GE water valve may fail electrically or mechanically.
Verifying the valve for electric failure
It is possible to check for an electrical problem through the GE refrigerator’s water valve which is usually located in the lower part of the refrigerator cabinet. You can use an analog or digital multimeter for checking continuity-good electrical current of the solenoid coils.
Connect the water supply cable from the valve. After that, disconnect those wires to the terminals on the solenoid coils. Every model comes with two terminals. Therefore, the number of coils differ.
Set the resistance setting to the lowest Ohms and calibrate the multimeter properly.
Set a probe at one of the terminals and then place the second probe on the terminal opposite. Repeat this procedure for each solenoid coil.
If the meter is measuring infinity Ohms of resistance, the display of a digital meter does not change much , or the needle of an analog meter does not move- the valve has no continuity and is bad.
Check the valve for signs of mechanical malfunction.
If you want to check for a mechanical failure of the water valve, it’s easy to identify a water supply issue.
Remove the water supply line to the GE water valve.
Put a bucket on the the line for water supply.
Turn on the water supply line to test the flow.
The problem may be in your water supply in the event that the water flow isn’t as strong or uneven. If the water flow is constant and strong, it could be a sign that the GE water valve is inaccessible or blocked.
A damaged GE water valve could result in a range of problems that could affect the water dispenser in your refrigerator as well as the ice maker. You can diagnose the problem and fix it using the methods in this article. Remember to always take proper security precautions while working with electrical equipment and water. If the issue is not resolved, or you’re not sure of the best way to perform the tests you should consult an experienced technician. By taking care of your refrigerator’s water intake valve, you can make sure that it functions properly and provide you with freshly-made, clean tasting water and frozen ice for many years to in the future.