Hoover Washing Machine Stops Mid Cycle – Fixed

Hoover Washing Machine Stops Mid Cycle – Fixed

It’s frustrating and confusing when your Hoover washer stop in mid-cycle. Not only is it annoying to to restart the cycle however, it could cost you a lot of money if the issue is not resolved and requires professional assistance. The homeowner can solve many reasons why a Hoover washing machines stops mid-cycle.

We will discuss common reasons Hoover washing machines stop mid-cycle , and provide step-by-step solutions. We’ll help you fix the timer and examine the lock on your door to make sure your Hoover washer is running smoothly once again. If you’re having trouble with a stubborn Hoover machine or just want to save money on repairs, read on for tips on how to repair a Hoover washer that has stopped mid-cycle. Incoming power issue Make sure the power cord is tightened. It should be connected tightly to ensure that there is constant electricity to the Hoover washer.


Washing Machine Control Board

A Hoover washer control board supplies voltage to nearly all of the washer’s electrical components. A malfunctioning board could cause the washer to stop mid-cycle. The board is able to be examined to look for indications of burned or damaged components. After studying the wiring diagram, you can use a multimeter to examine the power output terminals.


Washing Machine Door Lock Motor and Switch Assembly:

The Hoover door lock keeps the door to the washer when it is in use. After the Hoover door to the washer has been closed the washer is able to begin functioning. The Hoover washer won’t start operating in the event that the Hoover door isn’t shut. If the door lock is not working properly, the washing machine may stop mid cycle. The door lock can fail either mechanically or electrically. Inspect the door lock to find any damage. If the door lock appears damaged or is not latching properly, replace it.


Washing Machine Lid Switch Assembly:

The lid switch assembly blocks the washer from spinning when the lid is shut. The washer might stop spinning mid-cycle in the event that the lid switch assembly is not working properly. A multimeter can be used to examine each lid switch to ensure continuity. Replace the lid switch that is not in continuity. A lack of water Be sure that the cold water is flowing into the tub. The Hoover washer will not start the rinse cycle if the cold water supply is too slow or does not reach the tub. This could be due to a clogged water inlet valve or the main valve for water supply shutting partially, or low water supply pressure from your home.


Washing Machine Water Inlet Vave

The valve that opens the water inlet is opened during the rinse cycle to allow water to get to the tub for washing. If the valve to open the water inlet is damaged, the washer will continue waiting for the water to be able to enter the washer, causing it to stop mid-cycle. A multimeter is a tool to check for continuity in the valve that opens water. If the valve to the water’s inlet is not in good working order then replace it.


Drain pump for washing machine:

The Hoover washing-machine drain pump is used to drain the water from the tub. It force water through an empty drain tube or pipe that leads to a laundry tub. Because water can be drained from the tub multiple times throughout a wash cycle, a defective drain pump may stop the washer mid-cycle. If there is still water in the tub even after the washer ceases to run, examine the drain pump for obstruction. You can also use a multimeter to test the drain pump for electrical continuity . This will check if the pump is functional or not Washing


Machine Main Control Board:

The control board in the main machine could be in a state of deficiency. However, the control board is usually not the cause of this issue. Before replacing the control board in the main make sure you check all the most frequently defective components.


Washing Machine Timer

The timer may be defective. It’s easy to miss the mark on the problem with the timer. Before replacing it, make sure you look for other part that is defective. Examine the wiring diagram of the washer in order to identify whether it is damaged. Next, you can employ a multimeter in continuity testing. An Hoover washing machine that is stopped mid-cycle can be a bit frustrating, however it’s generally a simple fix.


By following the guidelines in this article, you will be able to troubleshoot and address common issues such as blocked filters, damaged door locks and incorrect timer settings. Before you attempt any repairs or maintenance, unplug your washing machine. If in doubt then consult the manual, or contact an expert. With just a amount of patience and time, you can have your Hoover washing machine operating without issue, and avoid the hassle of having restart the cycle , and the expense of repairs. Check the machine to check whether there are any issues and then take the necessary steps.