Hotpoint Washing Machine Won’t Fill With Water

Hotpoint Washing Machine Won’t Fill With Water

For those of you with a Hotpoint washing machine, you probably know the stress, headache, and costs when it you learn that your Hotpoint top-load washer won’t fill up. First make sure that your washing machine from Hotpoint does not have the water valves leaking, or if you have a kink in your water hose. Water is essential for top-load Hotpoint washers to function properly. If it isn’t filling up with water, then you know that something is wrong with your Hotpoint washer. You can easily check for the problem. Your home may flood in the event that you fail to do it properly. To learn more about how to maintain your appliance, make sure you read the manual of the owner.

What To Do When Hotpoint Washing Machine Will Not Fill?

  • Make sure the lid is closed completely
  • Check that hot and cold water are available.
  • Check to see if the fill lines are kinked.
  • Verify that the water inlet screens have not become blocked.

For this to be done correctly, turn off the water. Then, take out the fill hoses and clean your screens. Don’t remove them because this can cause flooding. Re-start the water and then install the hoses. Check for leaks. If your top-load Hotpoint washer is still not filling with water, it’s time for a repair. I hope this article has assisted you to understand some of the potential causes for your washer that doesn’t be able to fill up with water.